On the off chance that you are searching for another solution to tackle your artistic painting projects, then, at that point the Graco Project Painter Plus may be appropriate for you. This item is exceptionally helpful with a load of only 15 pounds. Intended for little to medium-sized ventures, you will be very dazzled with the accessible highlights of this model.
The Graco Magnum Project Painter Plus Paint Sprayer is the organization’s most moderate choice for sprayers in this class fit for taking care of bigger tasks. Moreover, it is suggested for painters who will go through less than 50 gallons of paint each year.
It focuses on DIYers who paint enough to legitimize claiming their own sprayer instead of renting one depending on the situation, however who aren’t doing it expertly and every now and again. Startup is more direct than the guidelines make it appear. Simply acquaint yourself with the different switches and parts, and you’ll be fine following to the guidelines to get set up.
Contents
Graco Project Painter Plus Paint Sprayer Review

In case you’re anticipating handling bigger home-improvement tasks, for example, staining your deck or weather sealing your garden fence, the Graco Magnum 257025 Project Painter Plus paint sprayer could provoke your curiosity. If you’re looking for a paint sprayer to paint your Garden equipment, you will be please to know that Graco Project Painter is on of the best paint sprayer for fences.
Specially centered on the sharp DIY client and remembering those with almost no experience for electric sprayers, this amazing machine darts away a strong 2800 PSI from its stainless steel cylinder pump.
Advancing with a 0.24 GPM (gallons a minute) stream rate, the Graco 257025 ought to permit quick fulfillment of huge projects. However, should the yield level be excessively extreme for your base material, a fast turn of the generous stream handle can bring the shut down for an ideal completion and that is why you have to be extremely careful when using this paint sprayer.
Furthermore, using a suction hose that draws straightforwardly from a unique paint holder, there’s no compelling reason to fill which avoids both wasting time and having unwanted messiness. Besides, being stand-mounted, the unique pump segments are shielded from trash and water entrance and permits a hunch-free operation.
On numerous tasks, its 25-foot hose will permit you to work serenely without moving the base unit. In any case, where transportation is fundamental, the sprayer includes a powerful handle consolidated into the upper packaging.
What’s more, when your work for the day is finished, you can store the mains line, firearm, and shower tip into stand-shaped compartments. Although, there’s no place to stash the hose. The Graco 257025 Project Painter Plus is the solitary floor-mounted pump machine in Graco’s airless DIY series. The spray gun is intended to leave your tasks with smooth completes and has a basic tidy up measure that any DIYer can deal with.
What I Like?
- It is perfect for large products.
- It is absolutely easy to clean.
- It can use unthinned paints easily.
What I Don’t Like?
- It has no place to store the hose.
- A little fragile when being used.
Graco Project Painter Plus Airless Paint Sprayer Features Review
Frame Of Graco Project Plus Paint Sprayer

The limited scale and low profile of the Graco Magnum Project Painter Plus misrepresent the machine’s force. This little airless artistic creation framework sneaks up all of a sudden. It weighs just 15lb so is light enough for you to move regularly or even convey alongside you while you’re painting.
Moreover, It is conservative, 12″x 13.5″ x13.5″, so it is not difficult to store. Indeed, even the bucket handle is incorporated into the body. It will not occupy a lot of room in the toolshed or carport.
Start up of Graco Magnum 257025 Airless Paint Sprayer

There is as much prep fill in likewise with some other airless framework and, indeed, cleansing the pump liquid can get somewhat muddled. Squander is a little issue, as it’s anything but a little thing that barely matters, In any case, the suction tube is taken care of straightforwardly into your paint can, which saves a ton of time.
Graco Magnum 257025 Cylinder Pump

The cylinder pump is produced from treated steel so it is strong and sturdy and should last the lifetime of the framework. It likewise implies the framework can withstand spraying unthinned materials at higher pressure too. It’s anything but a most extreme psi of 2800.
Suction Tube

Being an immediate feed framework, you can stick the suction tube into a one gallon or five gallon container of paint without a deviation. No compelling reason to mess with moving paint from the can to the cup. What’s more, you will not need to quit painting to continue to top off a paint cup all things considered. In fact, the 25ft Duraflex hose itself is adaptable, which makes the framework simpler to move around the place of work. A 50ft hose is likewise accessible.
Spray Gun of Graco Project Painter Plus Paint Sprayer

The total metal SG2 spray gun is itself a refined and solid piece of designing, highlighting an in-handle channel to avoid any sludge arriving at the splash tip. There were complains about leaking but in any case, if you fix the spray gun segment, the issue will be settled.
Pressure Control

Usually, what people like the most about this framework is the movable pressing control. With a touch of the dial you can change the air pressure to set off the application. The most extreme pressing factor is 2800 psi.
The dial includes simple to-peruse charts to help you make the right determination: prime, paint and clean. Another phenomenal element is that you can change the spout around from vertical to level splashing, in case you need it.
Concluding Graco Project Painter Plus Airless Paint Sprayer
In case you’re a DIYer who is thinking ambitiously or a jack of all trades whose daily agenda is crazy, the Graco Project Painter Plus is unquestionably a good fit for you. It’s worked to handle medium-sized activities around the house effortlessly.
Graco planned it in view of the client, from its reduced, lightweight edge, to its adaptable hose and attractions cylinder and Flush connector. It will not confront the burdens of thorough everyday work, except that is not what it’s worked for. As I would like to think, it’s an incredible pack in case you’re beginning or a decent back-up on the off chance that you maintain your own contracting business.
Related Guides Recommendations

Hi, I am Chris Berry, founder of MachinerySurgeon. I grew up in the Greater Houston TX while painting and doing different DIY projects in and out. While pursuing my enthusiasm for painting, I graduated in Arts of painting from Rice University, Texas. From last 12 years, I have been working as a painter in Houston and my expertise helped me to win the tag of best paint contractor in Houston.
Looking at my craze for painting and DIY tools, people started calling me Machinery Surgeon and this is where the idea to start MachinerySurgeon came in to my mind. Here, I share everything related to painting which I experienced and learned in last 25 years. Feel free to ask your questions related to painting.